Polyclutch® jaw-type clutches permit extremely simple, reliable phase adjustment, and/or engage-release between a shaft and gear, pulley, roller, etc. The D Series is knob operated, the J Series is lever operated. Clutch teeth are precision machined from solid steel blanks, 3º tooth spacing (120 teeth) is standard. Alternate spacing is available. Jaw clutches are stronger than the shaft driving it.
| Model No | A | B | C | D | E | F | P | Q | R | S | KEY |
| DH 20 | 1.25 | 0.250 | 1.87 | 0.562 | 0.39 | – | – | – | – | – | – |
| DH 32 | 2.00 | 0.500 | 2.50 | 1.252 | 0.75 | – | – | – | – | – | – |
| DJ 20 (jaws only) | 1.25 | 0.375 | 1.10 | 0.560 | 0.39 | – | – | – | – | – | – |
| DJ 32 (jaws only) | 2.00 | 0.750 | 1.95 | 1.250 | 0.75 | – | – | – | – | – | – |
| DK 20 | 1.25 | – | – | 0.562 | 0.39 | 0.375 | 0.338 | 0.032 | 0.833 | 0.845 | #212 |
| DK 32 | 2.00 | – | – | 1.252 | 0.75 | 0.750 | 0.703 | 0.048 | 0.890 | 1.470 | #606 |
| JH 32 | 2.00 | 0.500 | 3.37 | 1.252 | 0.75 | 0.750 | – | – | – | – | – |
| JK 32 | 2.00 | – | – | 1.252 | 0.75 | 0.750 | 0.703 | 0.047 | 0.890 | 1.625 | .187 SQ |
Use our contact page to get in touch with us directly for placing an order, requesting a quote, or getting your products repaired.
Use Our Contact Form
