Series 16 Sizes – Adjustable Torque
| Model No. | Torque (lb-in)* | Watts* | B (std)** | B (max) | A | C | D | E |
| SAS 16 & SAO 16 | 10 | 6 | 0.250 | 0.375 | 1.00 | 1.31 | 0.760 | 0.25 |
| PAS 16 & PAO 16 | 2 | 1 | 0.250 | 0.375 | 1.00 | 1.06 | 0.760 | 0.25 |
*Capacity at 50 RPM. Shown in lb-in. Torque capacities are only guidelines. Higher torques and speeds are possible depending on operating conditions. Consult engineering for details.
**Bore diameters (B) other than standards shown are available up to the maximum diameter. Tolerance +.002 / -.000 inches
Series 16 Sizes – Fixed Torque
| Model No. | Torque (lb-in)* | Watts* | B (std)** | B (max) | A | C | D | E |
| SFS 16 & SFO 16 | 10 | 6 | 0.250 | 0.375 | 1.00 | 1.00 | 0.760 | 0.25 |
| PFS 16 & PFO 16 | 2 | 1 | 0.250 | 0.375 | 1.00 | 0.78 | 0.760 | 0.25 |
*Capacity at 50 RPM. Shown in lb-in. Torque capacities are only guidelines. Higher torques and speeds are possible depending on operating conditions. Consult engineering for details.
**Bore diameters (B) other than standards shown are available up to the maximum diameter. Tolerance +.002 / -.000 inches
Series 16 Sizes – Adjustable Torque
| Model No. | Torque (Nm)* | Watts* | B (std)** | B (max)** | A | C | D | E |
| SAS 16 & SAO 16 | 1.2 | 6 | 8 | 9 | 25.40 | 33.27 | 19.30 | 6.35 |
| PAS 16 & PAO 16 | 0.3 | 1 | 8 | 9 | 25.40 | 26.92 | 19.30 | 6.35 |
*Capacity at 50 RPM. Shown in Nm. Torque capacities are only guidelines. Higher torques and speeds are possible depending on operating conditions. Consult engineering for details.
**Bore diameters (B) other than standards shown are available up to the maximum diameter. Maximum cartridge bore diameter is 9mm, however housing bore can be up to 10mm. Tolerance +.05 / -.00 mm
Series 16 Sizes – Fixed Torque
| Model No. | Torque (Nm)* | Watts* | B (std)** | B (max)** | A | C | D | E |
| SFS 16 & SFO 16 | 1.2 | 6 | 8 | 9 | 25.40 | 19.30 | 6.35 | |
| PFS 16 & PFO 16 | 0.3 | 1 | 8 | 9 | 25.40 | 19.81 | 19.30 | 6.35 |
*Capacity at 50 RPM. Shown in Nm. Torque capacities are only guidelines. Higher torques and speeds are possible depending on operating conditions. Consult engineering for details.
**Bore diameters (B) other than standards shown are available up to the maximum diameter. Maximum cartridge bore diameter is 9mm, however housing bore can be up to 10mm. Tolerance +.05 / -.00 mm
Specifying a Polyclutch Part Number
Part Number Example
1- Type of Clutch (S= multi-plate, P=single-plate)
2- Torque: A = adjustable, F = factory preset (fixed)
3- Installation Type (‘S’ or ‘O’)
4- Outer diameter
5- Cartridge bore size
6- Housing bore size
Customization:
If you are looking for something outside of our standard selection, just ask!
3D Models (.STP)
The files are the standard bore diameter for each size. Please contact us if you require a model in a different bore diameter.
Use our contact page to get in touch with us directly for placing an order, requesting a quote, or getting your products repaired.
Use Our Contact Form
