The SP series is a small standard link cable carrier. This carrier utilizes hinge bars that can open on the inner radius or the outer radius. The SP series is excellent for automation, robotics and light industrial applications.
Model – Height – Hinged Bar* – Separators – Length – Bracket (fixed) – Bracket (moving)**
Example: SP300-5-INNER-1-24.00-STSTR#1-STSTR#1
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
⇒ The standard separator placement is every 4th link. Please specify the number of separators specified per cavity.
⇒ Vertical cavity separators snap into carrier cross bars to provide multiple compartments in a single link.
*Note: Hinged bars are available on inner or outer radius. Hinged bars on inside radius is standard. Please specify when ordering.
**For example: STRAIN#1 Strain relief brackets are standard. See Mounting Brackets tab.
| Model | A (inside width) | C (outer width) | Weight (lb/ft) |
| SP059 | 0.59 | 1.05 | 0.20 |
| SP100 | 1.00 | 1.46 | 0.20 |
| SP150 | 1.50 | 1.96 | 0.23 |
| SP200 | 2.00 | 2.46 | 0.26 |
| SP250 | 2.50 | 2.96 | 0.28 |
| SP300 | 3.00 | 3.46 | 0.29 |
| SP400 | 4.00 | 4.46 | 0.36 |
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height | R (bend radius) | H (curve height) | K (depot) | CL (curve length) |
| 3 | 1.05 | 3.15 | 2.78 | 5.70 |
| 4 | 1.48 | 4.00 | 3.21 | 7.03 |
| 5 | 1.85 | 4.75 | 3.58 | 8.21 |
| 7 | 2.85 | 6.75 | 4.58 | 11.35 |
| 85 | 3.73 | 8.50 | 5.46 | 14.10 |
Model – Height – Hinged Bar* – Separators – Length – Bracket (fixed) – Bracket (moving)**
Example: SP300-5-INNER-1-24.00-STSTR#1-STSTR#1
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
⇒ The standard separator placement is every 4th link. Please specify the number of separators specified per cavity.
⇒ Vertical cavity separators snap into carrier cross bars to provide multiple compartments in a single link.
*Note: Hinged bars are available on inner or outer radius. Hinged bars on inside radius is standard. Please specify when ordering.
**For example: STRAIN#1 Strain relief brackets are standard. See Mounting Brackets tab.
| Model | A (inside width) | C (outer width) | Weight (kg/m) |
| SP059 | 15 | 27 | 0.3 |
| SP100 | 25 | 37 | 0.3 |
| SP150 | 38 | 50 | 0.34 |
| SP200 | 51 | 62 | 0.39 |
| SP250 | 64 | 75 | 0.42 |
| SP300 | 76 | 88 | 0.43 |
| SP400 | 102 | 113 | 0.54 |
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height No. | R (bend radius) | H (curve height) | K (depot) | CL (curve length) |
| 3 | 27 | 80 | 70 | 145 |
| 4 | 37 | 102 | 81 | 179 |
| 5 | 47 | 121 | 91 | 209 |
| 7 | 72 | 171 | 116 | 288 |
| 85 | 95 | 216 | 139 | 358 |
Specifications are listed as millimeters unless otherwise noted
Bracket Arrangements
Mounting Bracket Diagram & Dimensions
Strain relief brackets are standard on the SP Series.
| Model No. | Q in (mm) |
| SP059 | One Slot |
| SP100 | 0.59 (15) |
| SP150 | 0.94 (24) |
| SP200 | 1.44 (37) |
| SP250 | 1.94 (49) |
| SP300 | 2.44 (62) |
| SP400 | 3.44 (87) |
Use our contact page to get in touch with us directly for placing an order, requesting a quote, or getting your products repaired.
Use Our Contact Form
