The KN series is Gortrac’s smallest standard link. Because most models feature mounting holes as part of the link, separate brackets may not be necessary. KN series carriers are excellent for robotics, pick-and-place and light industrial applications.
How To Create A Part Number:
Model – Height – Length
Example: KN2-2-18.17
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
| Model | A (inside width) | C (outer width) | Weight (lb/ft) |
| KN2 | 0.97 | 1.47 | 0.14 |
| KN3 | 1.54 | 2.03 | 0.18 |
| KN4 | 1.87 | 2.36 | 0.2 |
Specifications are listed as inches unless otherwise noted
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height | R (bend radius) | H (curve height) | K (depot) | CL (curve length) |
| 2 | 0.70 | 2 | 2 | 3.77 |
| 3 | 1.20 | 3 | 2.50 | 5.35 |
Specifications are listed as inches unless otherwise noted
How To Create A Part Number:
Model – Height – Length
Example: KN2-2-18.17
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
| Model | A (inside width) | C (outside width) | Weight (kg/m) |
| KN2 | 25 | 37 | 0.21 |
| KN3 | 39 | 52 | 0.27 |
| KN4 | 47 | 60 | 0.3 |
Specifications are listed as millimeters unless otherwise noted
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height | R (bend radius) | H (curve height) | K (depot) | CL (curve length) |
| 2 | 18 | 51 | 51 | 96 |
| 3 | 30 | 76 | 64 | 136 |
Specifications are listed as millimeters unless otherwise noted
| Model No. | Q in.(mm) |
| KN2 | 1.18 (30) |
| KN3 | 1.74 (44) |
| KN4 | 2.16 (55) |
KN Series – Load Chart
Use our contact page to get in touch with us directly for placing an order, requesting a quote, or getting your products repaired.
Use Our Contact Form
