The Nylatrac® NP series is a medium size standard link plastic carrier. NP features hinge-open crossbars that can open on either the inner or outer radius. The user friendly design is excellent for machine tool, industrial and long travel applications. Universal type brackets are available upon request.
Inside Width: 2″ to 6″ (51 to 152 mm)
Inside Height: 1.54″ (39 mm)
Curve Heights: 7″ to 18″ (178 to 457 mm)
For smaller curve heights, see the P/PH or KS Series
For larger curve heights and cavity sizes, see the KL Series
How To Create A Part Number: Model – Height – Hinged Bar Location* – Separators – Length – Bracket (fixed) – Bracket (moving)**
Example: NP200-14-OUTER-2-41.23-STSTR#2-STSTR#2
⇒ The standard separator placement is every 4th link. Please specify the number of separators specified per cavity. ⇒ Vertical cavity separators snap into carrier cross bars to provide multiple compartments in a single link.
⇒ Length is specified in inches, to two decimals. It is the distance between flanges ⇒ (see formula on carrier side view diagram)
*Note: Hinged bars are available on inner or outer radius. Hinged bars on inside radius is standard. Please specify when ordering.
**For example: STRAIN#1 Strain relief brackets are standard. See Mounting Brackets tab.
Carrier Cross Sectional View
Model
A (inside width)
C (outer width)
Weight (lb/ft)
NP200
2.00
2.63
0.72
NP250
2.50
3.13
0.74
NP300
3.00
3.63
0.78
NP400
4.00
4.63
0.85
NP500
5.00
5.63
0.95
NP600
6.00
6.63
1.03
Specifications are listed as inches unless otherwise noted
Carrier Side View inches (mm)
Travel/2 + CL (+ Offset Distance From Center*) = Length Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
Height
R (bend radius)
H (curve height)
K (depot)
CL (curve length)
7
2.50
7.00
5.67
12.18
8
2.95
7.90
6.12
13.59
10
3.94
9.88
7.11
16.70
12
4.92
11.84
8.09
19.78
14
5.91
13.82
9.07
22.87
18
7.87
18.00
11.04
29.04
Specifications are listed as inches unless otherwise noted
Design Specs - Metric
How To Create A Part Number: Model – Height – Hinged Bar Location* – Separators – Length – Bracket (fixed) – Bracket (moving)**
Example: NP200-14-OUTER-2-41.23-STSTR#2-STSTR#2
⇒ The standard separator placement is every 4th link. Please specify the number of separators specified per cavity. ⇒ Vertical cavity separators snap into carrier cross bars to provide multiple compartments in a single link.
⇒ Length is specified in inches, to two decimals. It is the distance between flanges ⇒ (see formula on carrier side view diagram)
*Note: Hinged bars are available on inner or outer radius. Hinged bars on inside radius is standard. Please specify when ordering.
**For example: STRAIN#1 Strain relief brackets are standard. See Mounting Brackets tab.
Carrier Cross Sectional View
Model
A (inside width)
C (outer width)
Weight (kg/m)
NP200
51
67
1.07
NP250
64
80
1.1
NP300
76
92
1.15
NP400
102
118
1.26
NP500
127
143
1.41
NP600
152
168
1.54
Specifications are listed as millimeters unless otherwise noted
Carrier Side View
Travel/2 + CL (+ Offset Distance From Center*) = Length Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
Height
R (bend radius)
H (curve height)
K (depot)
CL (curve length)
7
64
178
144
309
8
75
201
155
345
10
100
251
180
424
12
125
301
205
502
14
150
351
230
581
18
200
457
280
738
Specifications are listed as millimeters unless otherwise noted
Mounting Brackets
Bracket Arrangements
Mounting Bracket Diagram & Dimensions
Strain relief mounting brackets are standard. Universal brackets are available (drawings below).
