Design Specs - English
TS Series – Weight Load:
How To Create A Part Number:
Model – Bar Style – Bar Width – Height – Separators – Length – Bracket (fixed) – Bracket (moving)
Example: TS-MB-9.79-245-0-101.50-#2IN-#2IN
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
⇒ Specify bracket type and arrangement # for each end
Cross Bar Styles:
– MB = Snap-In Plastic Flat Bar (fixed width)
– PR = Poly Roller (over bolted aluminum round bar)
– RB = Aluminum Round Bar
– AF = Aluminum Flat Bar-Bolted Design
– AFS = Aluminum Flat Bar-Snap-in Design
– PL = Plastic Lid (enclosed design)
– AP = Aluminum Armor Plate (enclosed design)
Carrier Cross Sectional View
| Model |
Bar Style |
A
(inner width) |
C (outer width) |
Weight (lb/ft) |
| TS |
MB |
2.93 |
4.45 |
2.40 |
| TS |
MB |
3.87 |
5.35 |
2.50 |
| TS |
MB |
4.80 |
6.33 |
2.60 |
| TS |
MB |
6.38 |
7.89 |
2.70 |
| TS |
MB |
7.62 |
9.14 |
2.80 |
| TS |
MB |
8.05 |
9.57 |
2.85 |
| TS |
MB |
9.79 |
11.32 |
2.90 |
| TS |
MB |
11.01 |
12.53 |
2.95 |
| TS |
MB |
11.48 |
13.00 |
3.00 |
| TS |
MB |
11.68 |
13.21 |
3.00 |
| TS |
MB |
13.57 |
15.09 |
3.10 |
| TS |
RB |
Customer Specified |
A + 1.52 |
2.45 |
| TS |
PR |
Customer Specified |
A + 1.52 |
2.69 |
| TS |
AF |
Customer Specified |
A+ 1.59 |
4.93 |
| TS |
AFS |
Customer Specified |
A+1.52 |
4.81 |
| TS |
PL |
Customer Specified |
A + 1.59 |
4.33 |
| TS |
AP |
Customer Specified |
A + 1.59 |
6.39 |
Specifications are listed as inches unless otherwise noted
Carrier Side View
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height |
R (bend radius) |
H (curve height) |
K (depot) |
CL (curve length) |
| 110* |
3.88 |
11.00 |
9.56 |
20.30 |
| 140* |
5.38 |
14.00 |
11.06 |
25.01 |
| 170 |
6.81 |
16.88 |
12.50 |
29.53 |
| 200 |
8.31 |
19.88 |
14.00 |
34.24 |
| 245 |
10.56 |
24.38 |
16.25 |
41.31 |
| 275 |
12.13 |
27.50 |
17.81 |
46.22 |
| 360 |
16.13 |
35.50 |
21.81 |
58.78 |
*The following options are not available with 110 and 140 curve heights: modular sliders, aluminum armor plates, plastic lids.
Specifications are listed as inches unless otherwise noted
Design Specs - Metric
TS Series – Weight Load:
How To Create A Part Number:
Model – Bar Style – Bar Width – Height – Separators – Length – Bracket (fixed) – Bracket (moving)
Example: TS-MB-9.79-245-0-101.50-#2IN-#2IN
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
⇒ Specify bracket type and arrangement # for each end
Cross Bar Styles:
– MB = Snap-In Plastic Flat Bar (fixed width)
– PR = Poly Roller (over bolted aluminum round bar)
– RB = Aluminum Round Bar
– AF = Aluminum Flat Bar-Bolted Design
– AFS = Aluminum Flat Bar-Snap-in Design
– PL = Plastic Lid (enclosed design)
– AP = Aluminum Armor Plate (enclosed design)
Carrier Cross Sectional View
| Model |
Bar Style |
A
(inner width) |
C (outer width) |
Weight (kg/m) |
| TS |
MB |
74 |
113 |
3.57 |
| TS |
MB |
98 |
136 |
3.72 |
| TS |
MB |
122 |
161 |
3.87 |
| TS |
MB |
162 |
200 |
4.02 |
| TS |
MB |
194 |
232 |
4.17 |
| TS |
MB |
205 |
243 |
4.25 |
| TS |
MB |
249 |
288 |
4.32 |
| TS |
MB |
280 |
318 |
4.39 |
| TS |
MB |
292 |
330 |
4.46 |
| TS |
MB |
297 |
336 |
4.46 |
| TS |
MB |
345 |
383 |
4.61 |
| TS |
RB |
Customer Specified |
A+39 |
3.65 |
| TS |
PR |
Customer Specified |
A+39 |
4.00 |
| TS |
AF |
Customer Specified |
A+39 |
7.34 |
| TS |
AFS |
Customer Specified |
A+39 |
7.16 |
| TS |
PL |
Customer Specified |
A+39 |
6.44 |
| TS |
AP |
Customer Specified |
A+39 |
9.51 |
Specifications are listed as millimeters unless otherwise noted
Carrier Side View
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
Curve Height, Length, Depot & Bend Radius Specifications
| Height |
R (bend radius) |
H (curve height) |
K (depot) |
CL (curve length) |
| 110* |
99 |
279 |
243 |
516 |
| 140* |
137 |
356 |
281 |
635 |
| 170 |
173 |
429 |
318 |
750 |
| 200 |
211 |
505 |
356 |
870 |
| 245 |
268 |
619 |
413 |
1049 |
| 275 |
308 |
699 |
452 |
1174 |
| 360 |
410 |
902 |
554 |
1493 |
*The following options are not available with 110 and 140 curve heights: modular sliders, aluminum armor plates, plastic lids.
Specifications are listed as millimeters unless otherwise noted
Mounting Brackets
Specify bracket arrangement (1, 2, 3, or 4) and mounting holes inward or outward
Standard Mounting Bracket Diagram & Dimensions
A (customer specified) = Cavity Width (bar/inside width)
Universal brackets are available:
Long Travel Layout
Low Mounted Cable Carrier with No Camber with Guide Trough
Download Specs (.XLSX)
TS Hybrid Carrier Long Travel System (Eliminates Guide Trough!)
The Hybrid carrier solution offers the lowest total cost of ownership (TCO) than any other long travel carrier solution, requires less space and averages 50% less installation time than standard long travel systems with guide troughs. The patented design consists of a modular plastic carrier with a metallic insert, delivering a truly revolutionary solution for long travel cable and hose management. Learn More & View Specs
ARS Long Travel System (Eliminates Guide Trough!)
Dynatect’s ARS Long Travel Support System adds articulating rollers that are positioned to support a standard plastic carrier and provide travels up to 300 feet without a guide trough. Learn More & View Specs
